MXBAOHENG Electric Din Rail Cutter Tool Double Groove with Rechargeable Battery for Cutting 35mm Wide, 7.5mm High Slotted Aluminium and Steel Din Rails

Product Specifications:Cutting Range: 35x7.5mm / 1.4x0.3inchLithium battery capacity: 1500mahCharging time: 1 hourBattery weight: 400gThis electric din rail cutter can make 200 to 300 cuts on a full charge.Package dimensions: 11.81x7.87x5.51in (300 x 200 x 140mm)Weight: 3kg/6.61lbs For electric Din rail cutting tools maintenance onlyBlade Lubrication Precautions: Always disconnect power before lubrication. Apply lubricating oil (sewing machine oil) once a month. Follow these steps: a) Locate the oil hole at the blade pin hole on the cutter's rear side b) Squeeze the lubricating oil from the bottle into the oil hole c) Perform test cuts without material to distribute the lubricating oil evenly Usage Precautions: Do NOT cut materials beyond the shear capacity range (e.g., hardened/quenched materials). Do not use the machine as pliers to clamp tools. Replace blades immediately when worn or damaged Maintain equipment cleanliness: Wipe electric rail cutter, battery and charger with clean cloth Avoid using corrosive/solvent-based cleaners Remove dust from cutter head using soft brush/dry cloth Avoid submerging the machine, battery, charger or any other components in water or other liquids. Post-operation blade maintenance: a) Clean debris from both moving and fixed blades b) Apply lubricant/oil to contact surfaces c) Maintains normal maintenance status, reduces resistance, and helps maintain blade performance d) Please store unused electric cutters with blades closed away from children's reach. Please note: After installing the battery and turning on the power switch, there is a startup interval. The cutter requires an approximately 60 seconds of warm-up time after pulling the trigger before entering operational mode.

• Our electric DIN rail cutting tool can cut steel and aluminum DIN rails with a width of 35 mm (1.4 inches), a height of 6.5–7.5 mm (0.26–0.3 inches), and a thickness of 0.5–1.2 mm (0.02–0.0472 inches).
• This DIN rail cutter tool features a sharp steel blade edge, delivering smooth cuts without burrs. The operation is simple, saving time and effort, ideal for quick and clean DIN rail cutting.
• This DIN rail cutting machine is perfect for cutting steel and aluminum guide rails, this DIN rail cutting tool is particularly suitable for on-site use in industries such as power and construction.